Chemicals

ArcelorMittal Gent carbon capture pilot exceeds 90% CO2 capture from blast furnace gas

The first-phase trial with MHI, BHP and MDP ran for more than 4,500 hours and will now extend testing to a different, more dynamic flue-gas stream from the hot strip mill reheating furnace.

Farida NasrNovember 2, 20265 min read1 views
An editorial illustration shows a blast furnace connected by insulated pipes to a modular carbon-capture unit, with abstract gas streams moving between them under cool industrial light.

ArcelorMittal, Mitsubishi Heavy Industries (MHI), BHP Group and Mitsubishi Development Pty Ltd (MDP) have completed the first phase of a carbon capture trial at ArcelorMittal's integrated steelmaking site in Gent, Belgium. The partners said the pilot captured more than 90% of the carbon dioxide from a portion of the blast furnace off-gas, generating operating and engineering data that will support assessment of a potential full-scale application at the Gent blast furnace.

The first phase involved more than 4,500 hours of operation and tested MHI's Advanced KM CDR Process on a gas stream that carries dust, sulfur-containing compounds and other contaminants. According to the partners, the campaign demonstrated the technical feasibility of applying the capture technology in a challenging steel-industry environment and increased confidence in its potential use across the sector.

Assessments based on the trial results indicate that a full-scale application to pre-combustion blast furnace off-gas could reduce CO2 intensity at the Gent site by up to 24%. The partners also said that applying the technology across multiple emission points in the steelmaking plant could support progress toward near-zero emissions intensity, a conditional outlook that depends on further engineering and deployment work.

In this phase, only CO2 was captured from a proportion of the blast furnace off-gas. The off-gas contains significant concentrations of CO2 and carbon monoxide. The remaining carbon content, in the form of CO, can be used for power and heat generation elsewhere at the integrated site, with CO2 released when that gas is combusted.

The second phase will broaden the application of carbon capture across multiple emission points. It will include testing the technology on gases from the hot strip mill reheating furnace, which is fired with gas and heats thick steel slabs to the temperature required for rolling into thin sheets. That furnace uses a blend of by-product gases from steelmaking, including coke oven gas, blast furnace off-gas and basic oxygen furnace gas, together with natural gas.

Phase 2 will assess MHI's technology under a different and more dynamic flue-gas profile, providing further data on how carbon capture can be integrated across multiple emission points or processes within an integrated steelworks. The results are expected to inform updated engineering and deployment studies for future full-scale applications.

Under the collaboration, ArcelorMittal is facilitating the trial in Gent. MHI is providing its proprietary Advanced KM CDR Process and leading carbon capture process engineering and technical evaluation. BHP and MDP, key suppliers of steelmaking raw materials to ArcelorMittal's European operations, are providing funding.

Frederik Van De Velde, CEO of ArcelorMittal Belgium, said the partners set out to better understand how carbon capture can be incorporated into existing steel plants. He described the first-stage outcome as successful and said the blast furnace gas trial has provided important data for scaling up technologies needed for decarbonization. He also said he looked forward to the first results from using carbon capture in the hot strip mill reheating furnace.

Tatsuto Nagayasu, senior vice president and head of CCUS at MHI, said completing more than 4,500 hours of operation and demonstrating capture rates above 90% from blast furnace gas marked an important milestone for applying the company's technology in the steel industry. He said the campaign showed the Advanced KM CDR Process could operate under challenging blast furnace gas conditions while generating data for future commercial-scale design assessments.

Dr. Ben Ellis, vice president of marketing sustainability at BHP, said the results are promising and demonstrate the abatement potential of the blast furnace and integrated steelmaking route. He noted that around 70% of global steel production comes from blast furnace steelmaking today and that the route is expected to remain a key process for decades, making it critical to reduce emissions from blast furnaces while developing alternate pathways.

Tadashi Mizuno, managing director and CEO of MDP, said the positive phase 1 results strengthened confidence that carbon capture applied to blast furnace gas could be a viable pathway for reducing emissions from the steel sector. He said energy efficiency improvements and high-quality raw materials will continue to matter in the near to medium term, while technologies such as CCUS could make a significant contribution to long-term decarbonization.